Engineer TH-TNM9
Fahrzeugingenieur (M. Eng.) mit Schwerpunkt Test, Absicherung und HiL-Prüfstandstechnik
- Vector CANoe
- Vector CANape
- DTS Monaco
- Simpack
- SimWB
- rFpro
DE C2/C2 · EN C1/C1 · FR A2/A2 · CH-DE speaks/understands
51 profiles
Design and development engineers join a product early and stay with it for a long time. They translate a requirement into geometry, select materials and joining methods, define tolerances and take the whole thing through trials and series release.
In Switzerland they often work in small development teams in which the same person is responsible for concept, detail and trials. The work is less drawing-driven than the title suggests. A large part consists of comparing variants, coordinating with purchasing and suppliers, cost analysis and documentation. Good engineers recognise early which requirement makes the product expensive and put it up for discussion instead of simply meeting it. Typical are CAD systems such as SolidWorks, NX, CATIA or Creo, PDM and PLM environments, tolerance calculation, DFM and DFA analysis, and knowledge of standards. Experience with series ramp-ups is a clear differentiator from pure concept work. With try&hire you watch a video profile, talk for thirty minutes and then work together. The engineers are employed via staff leasing; contract, salary and insurance run through us. After a few months, both sides decide on a permanent position. This makes particular sense in design: whether someone documents cleanly and manages changes traceably only becomes clear over several iterations.
Fahrzeugingenieur (M. Eng.) mit Schwerpunkt Test, Absicherung und HiL-Prüfstandstechnik
DE C2/C2 · EN C1/C1 · FR A2/A2 · CH-DE speaks/understands
Technischer Projektleiter & Engineering Manager – PLM, CAD, Digitalisierung
DE C2/C2 · EN B2/C1 · CH-DE speaks
Electrical Engineer, PhD ETH Zurich – Photonics, Device R&D and Technical Project Manageme
DE C2/C2 · EN C2/C2 · FR native/native · CH-DE speaks/understands
Senior Projektleiter & Entwicklungsingenieur Transformatoren und Hochspannungs-Schaltanlag
DE native/native · EN C2/C2
R&D Materials & Process Engineer | Process Development | Advanced Materials
DE A2/A2 · EN C1/C1 · FR A2/A2 · IT native/native
Ingénieur mécanique junior – simulation, fiabilité et vibrations
DE A2/A2 · EN C1/C1 · FR native/native
Materials Science & Mechanical Engineer specializing in composites and materials character
DE A1/A1 · EN native/native · FR native/native · IT A1/A1
Senior Konstrukteur Maschinenbau mit über 15 Jahren Erfahrung in Entwicklung und Konstrukt
DE C2/C2 · EN native/native · FR native/native
Simulation engineer for HVAC systems
DE A2/A2 · EN C2/C2 · CH-DE speaks/understands
Industrial Executive & R&D Director – Food Processing Equipment, 25+ Years Experience
DE A1/A1 · EN C2/C2 · FR B1/B1 · IT native/native
Konstrukteur · Unternehmer · Innovator
DE native/native · EN B1/B1 · CH-DE speaks/understands
Senior Mechanical Design & Airworthiness Certification Engineer – Aircraft Cabin Completio
DE A1/A1 · EN native/native · FR B1/B1
Ingénieure produit, qualité et R&D dispositifs médicaux (opto-mécanique, laser, SMQ ISO 13
DE B2/B2 · EN C2/C2 · FR native/native · IT A1/A1
Project Leader & Ingegnere Meccanico
DE C1/C1 · EN C2/C1 · FR A1/A1 · CH-DE speaks/understands · IT native/native
Mechanical Engineer – Process Equipment Design, FEA/CFD, SolidWorks (CSWA)
DE A1/A1 · EN B2/B2 · CH-DE speaks/understands